|
Description:
|
The AVR-1906 is equipped with an Auto Setup function, to achieve the most ideal sound field for your room. With the microphone placed at your listening position, the powerful 32bit floating point DSP automatically and accurately analyzes, adjusts and sets the speaker configurations of your system. The chassis that supports the large transformer has been designed to absorb vibration, and the transformer is housed inside a highly rigid frame to secure it more solidly to the chassis. In addition, a cushioning material has been placed around the core of the transformer to minimize interference on the signal and enable more faithful reproduction of the original sound. The AVR-1906 inherits these low-noise design from higher-end models not to mention the use of short ring. DENON's Twin Drive Rectifier design uses two rectifying diodes in parallel to bring out the maximum potential of the large transformer. Since the rectifiers recharge the large block capacitors at low impedance, they are able to supply ample current to reproduce deep basses as well as sudden bursts of sound from percussion or other musical instruments. DENON uses a large heatsink made of extruded aluminum. It is placed in a design that ensures mostly uniform temperatures throughout the heatsink. This will ensures that all channels respond with equal performance to the demands of the audio signals. For optimum Dolby Digital and dts reproduction, the AVR-1906 features high quality, wideband audio amplification, providing 85 watts power output for each of the seven main channels. A large capacity power supply includes a high current power transformer along with discrete power output devices on all 7 amplifier channels for highest dynamic range and superb reproduction clarity. The power amp circuits of the AVR-1906 have been meticulously designed to reproduce the exceptionally high sound quality with wide frequency response from 10 Hz to 100 kHz. The AVR-1906 is equipped with a total of 7 power amps including 2 for the Surround Back channel speaker to give you more clearly defined sound localization at the rear for 6.1-channel surround sources such as DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, Dolby Digital EX, and DTS-ES NEO: 6. Amplifiers initially reserved for Surround back (L/R) channels can be assigned to biwire Front (L/R) channels to improve playback quality in the front for enhanced listening enjoyment. Or the amplifiers can be assigned to Zone 2 speakers (with multisource), in addition to PREOUT for Zone 2. The sound from movie sources recorded in Dolby Digital, DTS or other formats emphasizes high-frequency range due to a theater's front speakers being placed behind the movie screen. If this sound is reproduced in the home theater without correction, the high-frequency range is too strong. The AVR-1906 features a Cinema Equalizer to correct these high-frequency components so that the sound is clearer and easier to listen to. (For Dolby Digital, Dolby Pro Logic IIx, Dolby Digital EX and DTS surround modes) The AVR-1906 includes the Personal Memory Plus function that automatically remembers the surround mode you last used for each program source, so that you do not need to select the mode again for that program.
|
|
Keywords:
|
Denon AVR-1906 (AV receiver - 7.1 channel)
|
| Main Specifications |
| Product Type | AV receiver
|
| Surround System Class | 7.1 channel
|
| Amplifier Output Details | 85 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.08% - 2 channel(s) ( front )
85 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.08% - 1 channel(s) ( center )
85 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.08% - 2 channel(s) ( surround )
85 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.08% - 2 channel(s) ( surround back )
120 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 2 channel(s) ( front )
120 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 1 channel(s) ( center )
120 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 2 channel(s) ( surround )
120 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 2 channel(s) ( surround back )
|
| Signal-To-Noise Ratio | 96 dB
|
| Built-in Display | Fluorescent
| | Audio |
| Response Bandwidth | 10 - 100000 Hz
|
| Built-in Decoders | Dolby Digital Surround EX, DTS Neo:6, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS 96/24, Dolby Digital, Dolby Pro Logic IIx
|
| Audio D/A Converter | 24bit / 192kHz
|
| Bass Control | Yes
|
| Digital Sound Processor (DSP) | Yes
|
| Sound Effects | Cinema EQ
|
| Sound Output Mode | Surround Sound
|
| Surround Sound Effects | Virtual Surround Mode
| | Connections |
| Connector Type | 6 x audio line-in ( RCA phono x 2 ) - rear
6 x audio line-out ( RCA phono x 2 ) - rear
1 x SPDIF input ( TOSLINK ) - front
2 x SPDIF input ( TOSLINK ) - rear
2 x SPDIF input ( RCA phono ) - rear
9 x speakers output ( banana/spade x 2 ) - rear
3 x S-Video input ( 4 pin mini-DIN ) - rear
2 x S-Video output ( 4 pin mini-DIN ) - rear
1 x composite video/audio input ( RCA phono x 3 ) - front
2 x composite video input ( RCA phono ) - rear
|
| Coaxial Digital Input | Yes
|
| Optical Digital Input | Yes
|
| Optical Digital Output | Yes
|
| Input Impedance | 47 kOhm
|
| Input Sensitivity | 200 mV
| | Remote Control | | Radio |
| Auto Preset Memory | Yes
|
| Tuner Frequency Range | FM: 87.5 - 107.9 MHz, AM: 520 - 1710 kHz
|
| Tuning Display | Fluorescent display
| | General |
| Height | 14.7 cm
|
| Width | 43.4 cm
|
| Depth | 41.7 cm
|
| Weight | 11.7 kg
|
| Additional Features | On-screen display
|
| Voltage Required | AC 120 V ( 60 Hz ) |
|
|
